achteruitrijlampen serie 2a

[ronald93]

hallo . ik wil graag achteruitrijlampen op mijn serie 2a maken . kan / past deze luxe hier op ???? . en waar in . :unsure:

[Roger B.]

een schakelaar op de bak zal het lastigst zijn.... een lamp achterop monteren is niet het lastige, er draadjes heen leggen ook niet... wat je ook nog kunt doen is een handmatig te bedienen schakelaar plaatsen

[RobStewart]

You need switch 575166 which is fitted to the right hand rear face of the turret that holds the gear lever in place on the top of the gear box. When reverse is selected the switch is pressed and your reversing lights come on. There used to be a kit RTC1181 which contained the switch the loom and the reversing lights. Some of the turrets have a pre-drilled hole otherwise you'll have to drill one yourself.

Have a look here http://www.lightweightlandroverclub.org/phpbb/viewtopic.php?f=8&t=2333&p=13889

Rob

[Roger B.]

had een series2a ook al zo'n schakelaar op de bak? en vooral....had ie dat dan niet altijd???

[RobStewart]

IIa probaby not (late IIa possibly) SIII somtimes and sometimes not but the principal is the same for all of them.

Rob

[ronald93]

RobStewart schrijft:

You need switch 575166 which is fitted to the right hand rear face of the turret that holds the gear lever in place on the top of the gear box. When reverse is selected the switch is pressed and your reversing lights come on. There used to be a kit RTC1181 which contained the switch the loom and the reversing lights. Some of the turrets have a pre-drilled hole otherwise you'll have to drill one yourself.

Have a look here http://www.lightweightlandroverclub.org/phpbb/viewtopic.php?f=8&t=2333&p=13889

Rob

thanks . and a picture say's more than 1000 words . :)